MENU

Author archives: Sachs

Sachs

Website:

    From Author Subject Date Download

    Replacing defective suspension springs

    Chassis springs – together with shock absorbers and spring strut support bearings – fulfill decisive safety and comfort functions. We therefore recommend regularly checking the component and, in the event of corrosion, cracks or breaks, replacing it. Defective springs negatively affect the vehicle handling and road safety: They extend the braking distance because they can …
    August
    29
    2018

    SACHS useful tip: Clutch slips.

    Causes of slipping clutches Clutch slip may have various causes. Besides the clutch pressure plate and the clutch disk, the problem is often found in the release system. Additional causes include an incorrectly remachined flywheel or installation of the wrong clutch. Therefore, check: Release system wear, freedom of movement, adjustment Verify that the parts are …
    June
    25
    2018

    Proper disposal of shocks and dampers.

    Environmental protection and disposal Our company places a high priority on protecting the environment. As a result, our concept of product quality includes not only optimum operating properties, long service life and convenient installation, but also saving resources and preserving the environment. For us, this means developing, producing and disposing of products in environmentally compatible …
    May
    30
    2018

    SACHS useful tip: Installing shocks and dampers free from distortion

    Improper assembly or accidents can lead to a distortion of shocks and dampers and later to serious component damage. ZF Aftermarket describes what to pay attention to during inspection and installation. Distortion can severely reduce the service life of shocks and dampers. ZF Aftermarket explains the causes as well as the effects on the chassis …
    January
    18
    2018

    Checking clutch disks

    Only install clutch disks that have been tested. ZF Aftermarket recommends always checking clutch disks for lateral runout before they are installed in the vehicle. The clutch disk is the component that makes the connection in the center of the clutch. It is a compact, very complicated component which is subjected to heavy loads. Together …
    December
    20
    2017

    Installing Clutches

    Professional clutch replacement Replacing the clutch of a manual transmission so expertly that the gears can be shifted again perfectly is mere routine for an automotive technician. However, as manufacturer analyses of some clutches that are subject to complaint show there are exceptions in certain cases. In these cases, the damage pattern proves that observing …
    December
    14
    2017

    Causes of slipping clutches

    Clutch slip may have various causes. Besides the clutch pressure plate and the clutch disk, the problem is often found in the release system. Additional causes include an incorrectly remachined flywheel or installation of the wrong clutch. Therefore, check: Release system wear, freedom of movement, adjustment Verify that the parts are correct for the vehicle …
    December
    11
    2017

    Clutch does not disengage.

    Causes If the clutch does not disengage, the problem is not necessarily the clutch itself. Frequent causes include faults in the release system, a jammed pilot bearing, or non-compliance with important installation requirements. Therefore, check: Were all professional check points observed during installation? Clutch release system Worn parts? Cable, hydraulics, pivot points. Correct setting?   …
    December
    7
    2017