Glowplug overview

Tim Howes

Tim Howes

Tim Howes, Deputy General Manager – Supply Chain & Technical Service, NGK Spark Plugs (UK) Ltd give an overview of the main types of glow plugs, and which ones a Motor Factor should stiock.

What are the main types of glow plug?

Diesel has obviously undergone a huge amount of change in the recent past. Although technology has moved on, the glow plug is essentially doing the same job that it always has done in raising the temperature inside the combustion chamber so that we can achieve stable combustion.
NGK Glow Plug
However, the demands placed on the glow plug have become extremely severe and the performance that we expect is significantly higher than we ever had in the past. The technologies that have evolved have been a direct response to those demands. We are reaching the point where we are trying to get the temperatures up in the combustion chamber so very, very quickly that there is no discernible delay between putting the key in the ignition and actually starting the engine with little or no smoke emission – even at extremely low ambient temperatures. You have therefore now got several technologies from the standard metal glow plugs to the latest generation NHTC (New High Temperature Ceramic) types and the AQGS (Advanced Quick Glow System) plugs. Ceramic glow plugs, though a little more expensive, are increasingly being selected by the OEs because of their long service life, extremely short pre-heating time and long post-heating time.

NGK new plug fitting imageWhich ones should a factor stock?
Because the glow plug is now a vital part and parcel of the Engine Management System, as with most other components, it has never been more important to ensure that the installer is fitting the correct specification item. You cannot go for a ‘cheap’ alternative nowadays because the Engine Management System can pick up very quickly the fact that it is the wrong item. The OBD system will find fault with the item if it is not to the correct specification and the performance of the vehicle will suffer. My advice is always to fit a plug that was manufactured to OE specification – as all NGK plugs are. For the factor one thing to bear in mind is that it is virtually impossible to offer an alternative part – even from within the NGK range – if you have not got a specific item in stock.

How does a factor know what is the right plug to sell to a customer?
All NGK glow plugs are always directed at what we consider the premium end. They are all manufactured to OE specifications or above. We are not in the business of producing cheap components just to gain market share. Our ‘Fit & Forget’ philosophy means that we will only test specific parts against specific applications when we are absolutely 100% sure that they are entirely suitable for the vehicle. This philosophy is one of the reasons why NGK has been so successful not only with spark plugs but with glow plugs as well.

Are there any cross-selling/up-selling opportunities in the area?
Glow plugs are not like a spark plug where you can offer an upgrade. With the glow plug it has to match the OE specification which the NGK offering always does.

Are there any common warranty issues which affect the glow plug and how can the factor help avoid them?
We are very fortunate that we do not really have any particular patterns of common warranty problems. In fact we do not have any warranty problems at all. I am convinced that this is due to our core policy of manufacturing to OE spec. A short term gain usually means long term problem if you have not got a quality product.

Are there any impending technological developments in the field, beyond even ceramic, and when is the factor likely to see them?
Reduction in available space to install the plug in new engine designs will continue and plugs like the NHTC ceramic types which are available with an unbelievably small thread diameter of M8 will continue to assist engine designers meet forthcoming emissions legislation. Although not at the same level as the ceramic types the small probe diameter AQGS plugs will become more widespread. At moderate ambient temperatures some modern direct injection engines are less reliant on the glow plug to start up. However we need to reduce emissions still further. One particular way of achieving a reduction of NOx is by lowering compression ratios. However this makes the engine more difficult to start and therefore the cars are once again more reliant on the glow plug to start the engine. Whatever challenges face engine designers you can rest assured that NGK will, as always, invest massively in research and development to provide them with a solution.

For more information about NGK Spark Plugs (UK) Ltd and its products and services, please visit the website at

Written by:

Published on: July 20, 2015

Filled Under: News, Technical Articles

Web site:

Comments are closed.