Causes If the clutch does not disengage, the problem is not necessarily the clutch itself. Frequent causes include faults in the release system, a jammed pilot bearing, or non-compliance with important installation requirements. Therefore, check: Were all professional check points observed during installation? Clutch release system Worn parts? Cable, hydraulics, pivot points. Correct setting?   …

If you have vehicles in your workshop with EDS, EDS/ASR or EDS/ASR/ESP where a chamber in the brake fluid reservoir is completely empty, or if you need to undertake special bleeding because leaks have been found, this clip is ideal for you.

MOOG part number TO-LS-4733 is supplied with the rubber bushes and washers which are assembled in a specific sequence for correct fitment. In order to fit the replacement stabiliser link bar to the vehicle it is necessary to dismantle the kit, connect to the wishbone and the anti-roll bar and then re-assemble.

If you feel rubbing when braking, troubleshooting should include measuring the difference in thickness on the friction ring of a brake disc.

A vehicle’s ABS control module is designed to notify the driver with a warning light if there is a malfunction in the system. The malfunction is rarely the modul or ABS itself. It is often one or more sensors, or the wiring to the sensors. The most common ABS problems occur when impulse wheels and …

This video clip covers wheel hub concentricity, often referred to as hub runout.

Checking the concentricity of the brake disc is an important process that should be undertaken after a new brake disc is installed.

During several garage visits we learned there are potential installation issues with the tensioner included in these kits. Although this tensioner looks very easy to install, there is one error often made.

Wheel end bearings are vital components of a car. They are crucial for safe, quit operation, minimising rolling resistance and assuring proper ABS function. On average the replacement cycle is around 150.000 Km.

tegral to the vehicle’s engine management system, the exhaust gas recirculation (EGR) valve recirculates a metered quantity of exhaust gas to the engine intake system, helping to increase engine efficiency, lower fuel consumption, and reduced NOx in diesel and petrol engines. The symptoms associated with an EGR valve failure are similar to those of many …